Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

13-46
Wireless Network Management
AP Detection
Figure 13-31.Network Setup > Radio Adoption Default > Configuration Screen
b. Select the radio type (802.11a, 802.1b, or 802.11bg).
c. Click the Edit button.
d. On the radio type’s Configuration screen, check the option that you
want for AP detection:
– Dedicate this Radio as a Detector
– Single-channel scan for Unapproved APs
e. Click the OK button.
4. Click the Save link at the top of the screen to save your changes to the
startup-config.
Creating Lists of Detected APs
AP detection simply enables RPs to report the APs that they detect. The
Wireless Edge Services xl Module then sorts the detected APs into approved
and unapproved lists.
By default, the module considers all APs to be unallowed, which means that
they are displayed on the unapproved list.