Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

13-87
Wireless Network Management
MAC Filters (Local MAC Authentication)
The ACL in the line indicated conflicts with an ACL already configured on
the Wireless Edge Services xl Module. That is, they have the same index
number.
Make one of two choices:
• Click the OK button, and import the file despite the conflict. The
module retains all of its already-configured ACLs. However, any non-
conflicting ACLs are imported normally.
•Click the Cancel button, and cancel the import. The module retails all
of its already-configured ACLs, and no new ACLs are saved to the
module. You can fix the problem in one of two ways:
– If you want your Wireless Edge Services xl Module to keep its
current ACLs, but also to receive all of the imported ACLs, edit
the .cvs file. Change the index numbers so that they no longer
conflict with those on the module.
Then re-import the file, as described in “Importing MAC Standard
ACLs” on page 13-83.
– If you want the ACLs in the imported file to override already-
configured ACLs, you must delete these ACLs from your Wireless
Edge Services xl Module.
In Security > MAC Filters screen, select the ACLs that conflict with
imported ACLs. Click the Delete button.
Then re-import the file, as described in “Importing MAC Standard
ACLs” on page 13-83.