Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

13-89
Wireless Network Management
Network Self Healing
■ Neighbors no longer receive beacons from the radio.
An RP checks the beacons that it has received every 30 seconds. If the RP
has not received beacons from a neighbor in the last two seconds, it
reports that neighbor as down. In other words, an RP considers a neighbor
failed when it loses contact with that neighbor for more than two seconds;
however, the RP only checks whether it has lost contact with a neighbor
every 30 seconds.
■ Neighbors fail to detect Wireless Internet Service Provider (WISP) heart-
beats from the radio.
Enabling Neighbor Recovery
To enable neighbor recovery, complete these steps:
1. Select Special Features > Self Healing > Configuration.
Figure 13-63.Enabling Neighbor Recovery
2. Check the Enable Neighbor Recovery box.
3. Click the Apply button.