Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module

871

872

873

874

875

876

877

878

879

880

Table Of Contents

ProCurve Wireless Edge Services xl Module and ProCurve Redundant Wireless Services xl Module
Title Page
Copyright and Disclaimer Notices
Table of Contents
1. Introduction
- Contents
- ProCurve Wireless Edge Services xl Module
- Radio Ports
- Redundancy Groups
- Layer 2 and Layer 3 Roaming Between RPs and Modules
2. Configuring the ProCurve Wireless Edge Services xl Module
- Contents
- Management Interfaces
- Radio Port Adoption
- System Maintenance
- SNMP Traps and Error Reporting
- Radio Port Licenses
- Setting System Information-Name, Time, and Country Code
- Enabling Secure Network Time Protocol (NTP)
- Digital Certificates
3. Radio Port Configuration
- Contents
- Overview
- Country-Code and Regulatory Procedures
- Configuring Radio Settings
  - Creating a Radio Adoption Default Configuration
  - Creating a Radio Configuration for a Particular Radio
- Considerations for Enabling Client Roaming
- Quality of Service (QoS) on RP Radios
  - WMM
  - SpectraLink Voice Priority (SVP)
4. Wireless Local Area Networks (WLANs)
- Contents
- Overview
- Configuration Options: Normal Versus Advanced Mode
  - Normal Mode Configuration
  - Advanced Mode Configuration
- Configuring a WLAN
- VLAN Assignment
  - WLAN-Based VLAN Assignment
    - Considerations for WLAN-Based VLAN Assignment
  - Identity-Based, or Dynamic, VLAN Assignment
- Traffic Management (QoS)
5. Web Authentication for Mobile Users
- Contents
- Overview
- Configuring Web-Auth
- Copying Logo Files to the Module’s Flash
- Configuring Custom Web-Auth Pages
  - Configuring the CGI Commands for the Login Page
  - Configuring the CGI Commands for the Welcome Page
6. IP Services-IP Settings, DHCP, and DNS
- Contents
- IP Settings
- IP Routing
- DNS Client
- DHCP Server
7. Access Control Lists (ACLs)
- Contents
- Overview
- Configuring ACLs
8. Configuring Network Address Translation (NAT)
- Contents
- Overview
- Planning the NAT Configuration
  - Consider Your Company’s Requirements for NAT
  - Record Necessary IP Addresses and Select the NAT Implementation Method
    - Planning the Configuration for Dynamic NAT
    - Planning the Configuration for Static NAT
- Configuring Standard ACLs for Dynamic NAT
- Configuring NAT
9. Fast Layer 2 Roaming and Layer 3 Mobility
- Contents
- Overview
- Configuring Fast Layer 2 Roaming for WPA/WPA2 with 802.1X
- Configuring Layer 3 Mobility
- Verifying and Managing Layer 3 Mobility
  - Monitoring Peers
  - Viewing a Station’s Status
10. Redundancy Groups
- Contents
- High Availability for Wireless Services
- Configuring a Redundancy Group
11. RADIUS Server
- Contents
- Overview
- RADIUS Authentication
  - Configuring the Internal RADIUS Server
  - Enabling Authentication to the Internal Server on a WLAN
- RADIUS Accounting
  - Enabling Accounting to the Internal RADIUS Server on a WLAN
  - Viewing the Internal RADIUS Server’s Accounting Logs
12. Configuring Tunnels with Generic Routing Encapsulation
- Contents
- Overview
- Configuring GRE Tunnels
- Viewing GRE Tunnels and WLAN Mappings
13. Wireless Network Management
- Contents
- Overview
- Monitoring the Wireless Network
- AP Detection
- Configuring Station Intrusion Detection
- Logging and Alarms
  - Configuring Logging
  - Managing the Alarm Log
- MAC Filters (Local MAC Authentication)
- Network Self Healing
  - Neighbor Recovery
  - Interference Avoidance
14. sFlow Agent
- Contents
- Overview
- Configuring sFlow Using the Web Browser Interface
Appendix A - ProCurve Wireless Services xl Module Command Line Reference
- Contents
- Overview
- Manager Commands
- Global Commands
- Interface Commands
- Wireless Commands
- Show Commands
- Show Commands (All Contexts)
- Show Commands (Wireless)
- Support Commands
- Support Commands (All Contexts)
- Support Commands (Wireless)
Index
Back Cover

A-21

ProCurve Wireless Services xl Module Command Line Reference

Manager Commands

ExampleOne

ExampleTwo

ProCurve(wireless-services-B)# dir all

-------------------------------------------------------------------

Directory of flash:/

drwx 1024 Wed Dec 7 17:06:32 2005 hotspot

drwx 1024 Thu Dec 8 09:31:07 2005 crashinfo

drwx 80 Mon Feb 13 09:35:10 2006 log

Directory of nvram:/

-rw- 625 Thu Dec 2 08:53:36 2006 startup-config

Directory of system:/

-rw- running-config

ProCurve(wireless-services-B)#

ProCurve(wireless-services-B)# dir /recursive

-------------------------------------------------------------------

Directory of flash:/

drwx 1024 Wed Dec 7 17:06:32 2005 hotspot

drwx 1024 Thu Dec 8 09:31:07 2005 crashinfo

drwx 80 Mon Feb 13 09:35:10 2006 log

Directory of flash:/hotspot

drwx 1024 Wed Feb 1 17:19:19 2006 lib

drwx 1024 Wed Feb 1 17:19:19 2006 cgi-bin

Directory of flash:/hotspot/lib

-rwx 58476 Tue Jan 31 13:12:09 2006 libpthread.so.0

-rwx 1245472 Tue Jan 31 13:12:09 2006 libc.so.6

-rwx 90776 Tue Jan 31 13:12:09 2006 ld-linux.so.2

-rwx 28400 Tue Jan 31 13:12:09 2006 librt.so.1

-rwx 138088 Tue Jan 31 13:12:09 2006 libm.so.6

Directory of flash:/hotspot/cgi-bin

-rwx 18248 Tue Jan 31 13:12:17 2006 hslogin.cgi

-rwx 16296 Tue Jan 31 13:12:18 2006 hslogout.cgi

Directory of flash:/crashinfo

No files in dir flash:/crashinfo

Directory of flash:/log

-rw- 0 Mon Feb 13 09:35:10 2006 messages.log

-rw- 11404 Mon Feb 13 09:35:18 2006 startup.log

ProCurve(wireless-services-B)#