Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

A-67
ProCurve Wireless Services xl Module Command Line Reference
Wireless Commands
– bss - Map wireless LANs to radio BSSIDs.
+<1-4> - The BSS where wireless LANs will be mapped.
- WLAN - A list (eg: 1,3,7) or range (eg: 3-7) of WLAN indices. When
a BSS is also specified, the first WLAN will be used as the primary
WLAN. When the auto option is used, the system will automati-
cally assign the first four WLANs as primaries on their respective
BSS.
+auto - Automatic assignment of BSS. The user selects wireless LANs,
and the system assigns them to a BSS automatically.
- WLAN - A list (eg: 1,3,7) or range (eg: 3-7) of WLAN indices. When
a BSS is also specified, the first WLAN will be used as the primary
WLAN. When the auto option is used, the system will automati-
cally assign the first four WLANs as primaries on their respective
BSS.
– channel-power - Location, channel and transmit power level.
+indoor - Indoor location.
+outdoor - Outdoor location.
The indoor and outdoor parameters share these parameters:
-<1-200>- Channel number.
++<4-20 - Power in dBm.
-acs - Auto channel selection (radio will scan for the least congested
channel at startup or reconfiguration).
++<4-20> - Power in dBm.
-random - Random channel selection.
++<4-20 - Power in dBm.
– copy-config-from - Copies the configuration from a previously config-
ured radio.
+<1-1000> - A single radio index.
+default-11a - Default 11a configuration template.
+default-11bg - Default 11bg configuration template.
– detector - Dedicate s this radio as a detector. No stations can
associate to a detector.
– dtim-period - DTIM period (number of beacons between successive
DTIMs).
+<1-50> - DTIM period.
– max-stations - Maximum number of stations allowed to associate.
+<1-64> - Number of stations.
– reset - Resets a r ad io (t hi s wil l only reset th e specified radio, n ot
the complete radio-port).