Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

A-80
ProCurve Wireless Services xl Module Command Line Reference
Show Commands
Show Commands
These commands are common commands used to display configured parameters in
all contexts.
Command Function Page
Show Commands (All Contexts)
show alarm-log (<1-65535> |
acknowledged | all | new |)
Displays list of alarms occurring since boot. A-83
show commands Shows command lists. A-84
show crypto pki (certificates |
trustpoints |)
Displays encryption related commands. A-85
show debug Displays debugging setting. A-85
show file (information | systems |) Displays file system information. A-86
show flash Displays boot status. A-87
show history Displays the session command history. A-87
show hostname Displays the hostname. A-88
show interfaces Shows interfaces status and configuration. A-88
show ip (arp | dns | domain | interface
| route | routing | web-management |)
Shows ip parameters. A-89
show licenses (uninstalled |) Displays license information. A-91
show logging Displays message logging facilities. A-91
show management Displays L3 Management Interface name. A-92
show password-encryption Displays password encryption. A-96
show redundancy-group Displays redundancy group parameters. A-96
show redundancy-history Displays state transition history of the wireless
module.
A-96
show redundancy-member Displays redundancy member parameters. A-96
show running-config
(include-
factory | interface )
Displays current operating configuration. A-96
show snmp [user (manager |
operator) | server | ]
Displays snmp engine parameters. A-98