Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater

A-114
ProCurve Wireless Services xl Module Command Line Reference
Show Commands (Wireless)
Example
show wireless radio-status
This command displays the radio configuration.
Syntax
show wireless radio-status (<1-1000> | beacon table)
• radio-status - Radio status.
– <1-1000> - Single radio index.
– beacon table - The radio-to-radio beacon table.
Default Setting
N/A
ProCurve(wireless-services-B)(config-wireless)#show wireless radio-statistics
***** Radio-1 *********************
stations Associated : 1
------ Traffic -------------------------------------------------------
Total Rx Tx
---------------- ---------------- ----------------
30s 1hr 30s 1hr 30s 1hr
Pkts per sec: 29.43 8.60 0.00 0.00 29.43 8.60 pps
Throughput: 0.01 0.00 0.00 0.00 0.01 0.00
Mbps
Avg bit speed: 0.00 0.00 Mbps
% Non-unicast pkts: 100.00 100.00
------ RF Status------------------------------------------------------
30s 1hr
Avg station signal: 0.00 0.00 dBm
Avg station noise: 0.00 0.00 dBm
Avg station SNR(dB): 0.00 0.00
------ Errors---------------------------------------------------------
30s 1hr
Avg number of retries: 0.00 0.00
% gave up pkts: 0.00 0.00
% Non-decryptable pkts: 0.00 0.00