Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater
Table Of Contents
- ProCurve Wireless Edge Services xl Module and ProCurve Redundant Wireless Services xl Module
- Title Page
- Copyright and Disclaimer Notices
- Table of Contents
- 1. Introduction
- Contents
- ProCurve Wireless Edge Services xl Module
- Wireless Networks and WLANs
- The Interface Between the Wireless and Wired Networks
- Layer 2 and Layer 3 Operation
- Determining the Layer 3 Services Your Wireless Edge Services xl Module Should Provide
- IP Routing
- DHCP Services
- Security Features
- Traffic Management and QoS
- Management Capabilities and sFlow
- RP Licensing
- Radio Ports
- Redundancy Groups
- Layer 2 and Layer 3 Roaming Between RPs and Modules
- 2. Configuring the ProCurve Wireless Edge Services xl Module
- Contents
- Management Interfaces
- Radio Port Adoption
- System Maintenance
- Software Images
- Configuration Files
- Viewing Configuration Files
- Transferring, or Copying, Files
- Transferring Configuration Files from an FTP or TFTP Server to the Wireless Edge Services xl Module
- Transferring Configuration Files from the Wireless Edge Services xl Module to Another Destination
- Managing the Directory Structure and Browsing for Files
- Deleting a Configuration File
- Returning the Startup-Config File to Factory Default Settings
- Update Server
- Password Encryption
- SNMP Traps and Error Reporting
- Radio Port Licenses
- Setting System Information-Name, Time, and Country Code
- Enabling Secure Network Time Protocol (NTP)
- Digital Certificates
- 3. Radio Port Configuration
- 4. Wireless Local Area Networks (WLANs)
- Contents
- Overview
- Configuration Options: Normal Versus Advanced Mode
- Configuring a WLAN
- VLAN Assignment
- Traffic Management (QoS)
- 5. Web Authentication for Mobile Users
- 6. IP Services-IP Settings, DHCP, and DNS
- 7. Access Control Lists (ACLs)
- 8. Configuring Network Address Translation (NAT)
- 9. Fast Layer 2 Roaming and Layer 3 Mobility
- 10. Redundancy Groups
- Contents
- High Availability for Wireless Services
- Configuring a Redundancy Group
- Configuring Redundancy Group Settings
- Adding Members to the Redundancy Group
- Enabling Redundancy
- Viewing Information about the Redundancy Group
- Viewing Information about the Other Members of the Redundancy Group
- Setting up Adoption Preference IDs to Control RP Adoption
- Reverting RPs Adopted by a Standby Member to the Active Member
- 11. RADIUS Server
- Contents
- Overview
- RADIUS Authentication
- Configuring the Internal RADIUS Server
- Choosing the Authentication Type for 802.1X/EAP
- Specifying the RADIUS Server’s Digital Certificate
- Choosing the Source for User Credentials
- Configuring the Local RADIUS Database
- Using LDAP for the Data Source
- Specifying a Domain Proxy RADIUS Server
- Specifying Global RADIUS Settings
- Adding RADIUS Clients
- Starting and Stopping the RADIUS Server
- Enabling Authentication to the Internal Server on a WLAN
- Configuring the Internal RADIUS Server
- RADIUS Accounting
- 12. Configuring Tunnels with Generic Routing Encapsulation
- 13. Wireless Network Management
- Contents
- Overview
- Monitoring the Wireless Network
- AP Detection
- Configuring Station Intrusion Detection
- Logging and Alarms
- MAC Filters (Local MAC Authentication)
- Network Self Healing
- 14. sFlow Agent
- Appendix A - ProCurve Wireless Services xl Module Command Line Reference
- Contents
- Overview
- Manager Commands
- Global Commands
- Interface Commands
- Wireless Commands
- Show Commands
- Show Commands (All Contexts)
- show alarm-log
- show commands
- show crypto
- show debug
- show file
- show flash
- show history
- show hostname
- show interfaces
- show ip
- show licenses
- show logging
- show management
- show password-encryption
- show redundancy-group
- show redundancy-history
- show redundancy-member
- show running-config
- show snmp
- show sntp
- show startup-config
- show terminal
- show time
- show timezone
- show upd-server
- show upgrade-status
- show version
- show vlans
- Show Commands (Wireless)
- show wireless ap-detection-config
- show wireless approved-aps
- show wireless channel-power
- show wireless config
- show wireless ids
- show wireless mac-auth-local entries
- show wireless phrase-to-key
- show wireless radio-config
- show wireless radio-statistics
- show wireless radio-status
- show wireless regulatory
- show wireless rp-images
- show wireless rp-status
- show wireless rp-unadopted
- show wireless self-heal-config
- show wireless station
- show wireless station-statistics
- show wireless unapproved-aps
- show wireless web-auth-config
- show wireless wireless-module-statistics
- show wireless wlan-config
- show wireless wlan-statistics
- Support Commands
- Support Commands (All Contexts)
- Support Commands (Wireless)
- Index
- Back Cover
Index – 1
Index
Numerics
5300xl Series
See wireless services-enabled switch … 1-4
802.11
frame types … 1-55
management frames … 1-55
overview … 1-53
802.11 replay attack … 13-57
802.11a
defined … 1-53
radio adoption defaults for … 3-9
802.11b
defined … 1-54
radio adoption defaults for … 3-9
802.11g
802.11g only … 3-16
defined … 1-54
radio adoption defaults for … 3-9
802.11h … 1-54
802.1X … 1-24
client on radio port … 1-67, 1-73, 2-77
configuring on a WLAN … 4-35
dynamic VLANs with … 4-88
pre-authentication for … 9-3
RADIUS server settings … 4-39
station settings … 4-37
A
access category
setting for WLAN manually … 4-109
WMM and … 4-93
accounting
overview … 4-69
RADIUS … 11-36
See also RADIUS accounting
syslog, for WLAN … 4-70
ACL
applying to interface … 1-40, 7-26
applying to physical port … 7-26
configuration steps … 7-10
creating and choosing type … 7-10
dynamic or user-based … 1-35, 4-89
extended IP
defined … 7-3
destination IP filter … 7-22
ICMP filter … 7-19
protocol filter … 7-19
source address filter … 7-22
TCP/UDP port filter … 7-21
filters
overview … 7-5
MAC extended
defined … 7-4
encapsulated protocol filter … 7-25
priority filter … 7-25
VLAN ID filter … 7-25
MAC standard (filter)
allow list … 13-75
applying to a WLAN … 13-77
configuring … 13-74
defined … 7-4
deny list … 13-75
NAT
standard ACL for … 8-20
operation
physical port required … 7-26
types … 7-6
overview … 7-2
precedence
defined … 7-5
setting in extended IP … 7-18
setting in MAC extended … 7-23
setting in standard IP … 7-15
viewing in detailed statistics … 7-31
routing required for … 7-26
rules
creating … 7-13
creating for extended IP … 7-16
creating for MAC extended … 7-23
creating for standard IP … 7-14
overview … 7-4
standard IP
defined … 7-3
source address filter … 7-16
stateful … 7-2
strategies for creating … 7-8
types … 1-39, 7-3