Wireless/Redundant Edge Services xl Module Management and Configuration Guide WS.02.xx and greater
Table Of Contents
- ProCurve Wireless Edge Services xl Module and ProCurve Redundant Wireless Services xl Module
- Title Page
- Copyright and Disclaimer Notices
- Table of Contents
- 1. Introduction
- Contents
- ProCurve Wireless Edge Services xl Module
- Wireless Networks and WLANs
- The Interface Between the Wireless and Wired Networks
- Layer 2 and Layer 3 Operation
- Determining the Layer 3 Services Your Wireless Edge Services xl Module Should Provide
- IP Routing
- DHCP Services
- Security Features
- Traffic Management and QoS
- Management Capabilities and sFlow
- RP Licensing
- Radio Ports
- Redundancy Groups
- Layer 2 and Layer 3 Roaming Between RPs and Modules
- 2. Configuring the ProCurve Wireless Edge Services xl Module
- Contents
- Management Interfaces
- Radio Port Adoption
- System Maintenance
- Software Images
- Configuration Files
- Viewing Configuration Files
- Transferring, or Copying, Files
- Transferring Configuration Files from an FTP or TFTP Server to the Wireless Edge Services xl Module
- Transferring Configuration Files from the Wireless Edge Services xl Module to Another Destination
- Managing the Directory Structure and Browsing for Files
- Deleting a Configuration File
- Returning the Startup-Config File to Factory Default Settings
- Update Server
- Password Encryption
- SNMP Traps and Error Reporting
- Radio Port Licenses
- Setting System Information-Name, Time, and Country Code
- Enabling Secure Network Time Protocol (NTP)
- Digital Certificates
- 3. Radio Port Configuration
- 4. Wireless Local Area Networks (WLANs)
- Contents
- Overview
- Configuration Options: Normal Versus Advanced Mode
- Configuring a WLAN
- VLAN Assignment
- Traffic Management (QoS)
- 5. Web Authentication for Mobile Users
- 6. IP Services-IP Settings, DHCP, and DNS
- 7. Access Control Lists (ACLs)
- 8. Configuring Network Address Translation (NAT)
- 9. Fast Layer 2 Roaming and Layer 3 Mobility
- 10. Redundancy Groups
- Contents
- High Availability for Wireless Services
- Configuring a Redundancy Group
- Configuring Redundancy Group Settings
- Adding Members to the Redundancy Group
- Enabling Redundancy
- Viewing Information about the Redundancy Group
- Viewing Information about the Other Members of the Redundancy Group
- Setting up Adoption Preference IDs to Control RP Adoption
- Reverting RPs Adopted by a Standby Member to the Active Member
- 11. RADIUS Server
- Contents
- Overview
- RADIUS Authentication
- Configuring the Internal RADIUS Server
- Choosing the Authentication Type for 802.1X/EAP
- Specifying the RADIUS Server’s Digital Certificate
- Choosing the Source for User Credentials
- Configuring the Local RADIUS Database
- Using LDAP for the Data Source
- Specifying a Domain Proxy RADIUS Server
- Specifying Global RADIUS Settings
- Adding RADIUS Clients
- Starting and Stopping the RADIUS Server
- Enabling Authentication to the Internal Server on a WLAN
- Configuring the Internal RADIUS Server
- RADIUS Accounting
- 12. Configuring Tunnels with Generic Routing Encapsulation
- 13. Wireless Network Management
- Contents
- Overview
- Monitoring the Wireless Network
- AP Detection
- Configuring Station Intrusion Detection
- Logging and Alarms
- MAC Filters (Local MAC Authentication)
- Network Self Healing
- 14. sFlow Agent
- Appendix A - ProCurve Wireless Services xl Module Command Line Reference
- Contents
- Overview
- Manager Commands
- Global Commands
- Interface Commands
- Wireless Commands
- Show Commands
- Show Commands (All Contexts)
- show alarm-log
- show commands
- show crypto
- show debug
- show file
- show flash
- show history
- show hostname
- show interfaces
- show ip
- show licenses
- show logging
- show management
- show password-encryption
- show redundancy-group
- show redundancy-history
- show redundancy-member
- show running-config
- show snmp
- show sntp
- show startup-config
- show terminal
- show time
- show timezone
- show upd-server
- show upgrade-status
- show version
- show vlans
- Show Commands (Wireless)
- show wireless ap-detection-config
- show wireless approved-aps
- show wireless channel-power
- show wireless config
- show wireless ids
- show wireless mac-auth-local entries
- show wireless phrase-to-key
- show wireless radio-config
- show wireless radio-statistics
- show wireless radio-status
- show wireless regulatory
- show wireless rp-images
- show wireless rp-status
- show wireless rp-unadopted
- show wireless self-heal-config
- show wireless station
- show wireless station-statistics
- show wireless unapproved-aps
- show wireless web-auth-config
- show wireless wireless-module-statistics
- show wireless wlan-config
- show wireless wlan-statistics
- Support Commands
- Support Commands (All Contexts)
- Support Commands (Wireless)
- Index
- Back Cover
Index – 3
options for WLAN … 1-24
RADIUS MAC … 1-27, 4-44
See also 802.1X
See also MAC authentication
See also Web-Auth
shared-key … 4-76
Web-Auth … 1-26, 4-40, 5-2
authentication failure attack … 13-57
auto-channel select
configuring for specific radio … 3-32
configuring in radio adoption defaults … 3-13
running … 3-37, 3-41
auto-provisioning … 1-8, 2-57
B
basic rate settings
802.11g only … 3-16
defined … 3-16
specifying for specific radio … 3-32
specifying in radio adoption defaults … 3-16
basic service set … 1-55
basic service set identifier
See BSSID
beacon
DTIM in … 3-23
information in … 1-60
setting interval for radio adoption defaults … 3-23
setting interval for specific radio … 3-33
SSID in … 1-60, 4-9
selecting … 4-18, 4-21
bind DN and password … 11-22
broadcast key … 4-57, 4-58, 4-61
BSS … 1-55
BSSID
defined … 1-57
generated from base radio MAC … 3-30
radio ports, on … 1-59
WLANs assigned to … 3-34
C
certificate
CA-signed, uploading to module … 2-180
defined … 1-43, 2-165
deleting … 2-183
public/private keys
creating manually … 2-190
creating with Certificates Wizard … 2-176
defined … 2-166
deleting … 2-183
passphrase for … 2-195
transferring … 2-192
request
creating … 2-174
saving … 2-179
specifying LDAP values for … 2-177
revocation list
uploading … 2-186
self-signed
creating … 2-171
specifying LDAP values for … 2-173
uses … 2-165
certificate revocation list, uploading … 2-186
Certificates Wizard
accessing … 2-169
CA-signed certificate, uploading … 2-180
certificate request, creating … 2-174
deleting operations … 2-183
public/private key, creating … 2-172
self-signed certificate, creating … 2-171
CGI commands
Web-Auth pages on external server … 5-36, 5-37
Web-Auth pages on internal server,
advanced … 5-36, 5-37
channel
auto-channel select
for radio adoption defaults … 3-13
for specific radio … 3-32
manually selecting … 3-32
CLI … 2-21
redundancy group configuration mode
context … 10-9
saving changes in … 2-23
using … 2-23
wireless-services context … 2-22
write memory … 2-23
closed system
defined … 1-60
enabling on WLAN … 4-66
primary WLAN and … 1-61
command line interface
See CLI