HP Smart Update Manager 5.0 User Guide

Introduction 10
o
libxcb-1.5-1.el6.i686.rpm
o libXau-1.0.5-1.el6.i686.rpm
o libXrender-0.9.5-1.el6.i686.rpm
o libXrandr-1.3.0-4.el6.i686.rpm
o libXfixes-4.0.4-1.el6.i686.rpm
o libXcursor-1.1.10-2.el6.i686.rpm
o fontconfig-2.8.0-3.el6.i686.rpm
o expat-2.0.1-9.1.el6.i686.rpm
o expect-5.44.1.15-2.el6.<arch>.rpm
o zlib-1.2.3-25.el6.i686.rpm
o libstdc++-4.4.4-13.el6.i686.rpm
o net-snmp-5.5-27.el6.<arch>.rpm
Supported deliverables overview
HP SUM support is specific to the deliverable in which it is delivered. Make sure you use the correct version
of HP SUM that is released along with the deliverable supporting the environment.
NOTE: Not all functionality is available in each version of HP SUM. Before using HP SUM that
comes with a deliverable, review the Support and limitations ("Support and limitations of HP
SUM" on page 10) of that version of HP SUM to determine if it has the features that you need.
Support and limitations of HP SUM
Before installing HP SUM, use the following table to verify that you are using the appropriate software
version.
HP SUM
version
Delivered with Support and limitations
4.0.0
For ProLiant servers:
•
HP ProLiant Support Pack for Windows
8.40
•
HP ProLiant Support Pack for Linux 8.40
•
HP Smart Update Firmware DVD 9.0
For ProLiant Workstation Blades:
•
HP Workstation Support Pack for
Windows for HP WS460c G6 Blade
•
HP Smart Update Firmware DVD 9.0
(offline only)
No support for Integrity server firmware or support
packs
4.0.0.64
•
HP Integrity Support Pack for Windows
on Itanium-based systems
•
Support for Integrity Support Pack for Windows
7.00
•
No support for Integrity server firmware
bundles
•
No support to download the latest components
available from ftp.hp.com through the HP SUM
GUI and command line options
4.0.1
•
HP ProLiant Support Pack for Windows
No support for Integrity server firmware or support