HP Smart Update Manager 5.0 User Guide

Introduction 11
HP SUM
version
Delivered with Support and limitations
8.50
HP ProLiant Support Pack for Linux 8.50
packs
4.0.2
HP Smart Update Firmware DVD 9.10
No support for Integrity server firmware or support
packs
4.1.0
HP ProLiant Support Pack for Windows
8.60
HP ProLiant Support Pack for Linux 8.60
No support for Integrity server firmware or support
packs
4.2.0
HP ProLiant Support Pack for Linux 8.70
HP ProLiant Support Pack for Windows®
8.70
No support for Integrity server firmware or support
packs
4.2.1
HP Smart Update Firmware DVD 9.30
No support for Integrity server firmware or support
packs
4.9.5
HP Integrity Server Bundles
HP BL8x0c i2 server
HP rx2800 i2 server
HP c-Class Onboard Administrators
No VC support
5.0.0
HP Smart Update Firmware DVD
HP Integrity Server Bundles
HP Superdome 2 server
VC support
Deployment from HP SUM
The following sections discuss deployment from HP SUM.
Executing HP SUM
HP SUM provides three modes of execution for users:
GUI—For firmware and software deployments
ExpressFor software deployments only (local host only)
ScriptedFor silent firmware and software deployments
HP SUM supports local and remote deployments. HP SUM runs in standard Windows and Linux operating
systems in online and offline mode (available on HP Smart Update Firmware DVD) through special boot
environments based on Linux boot kernels when the prerequisites are met.
Use the following table to determine the correct execution mode for the server use case.
IMPORTANT: Before deploying software updates to a target server, be sure that a recent backup
of the target server is available in the event the deployment procedure fails.
Scenario Description HP SUM command HP deliverable
Interactive, graphical
deployment on a local
host (Run HP SUM on the
server being updated.)
Use this scenario when you:
Are not familiar with
command line tools
Are deploying
components on a local,
single host
Windows:
hpsum
Linux:
./hpsum
Online:
HP ProLiant Support Pack for
Windows and Linux
or
Smart Update Firmware DVD
Offline: