HP Remote Graphics Software 5.4.0 User Guide
5.3 RGS login methods
RGS provides three methods for the local user to log into a Remote Computer:
●
Standard Login—supported on Windows and Linux Senders. For an overview of Standard
Login
Establishing an RGS connection using Standard Login on page 19.
●
Easy Login—supported on Windows XP Professional Senders on HP blade workstations.
●
Single Sign-on—supported on Windows XP Professional Senders on HP blade workstations and
HP personal workstations. For an overview of Single Sign-on and Easy Login, see
Single Sign-on
and Easy Login on page 20.
The log in method that is used is dependent on how the Sender was installed—see
Figure 3-6 Dialog to
enable Single Sign-On or Easy Login on page 54. If neither Easy Login nor Single Sign-on was enabled
during installation, Standard Login is used (see
Figure 5-9 Log in selection flowchart on page 95).
Figure 5-9 Log in selection flowchart
Each method is described below.
5.3.1 Standard Login
Standard Login is the process by which a local user attempts to connect to a Remote Computer that has
neither Single Sign-on nor Easy Login enabled.
ENWW
RGS login methods
95