HP Remote Graphics Software 5.4.0 User Guide

6.4.5 Using audio
The audio controls in the Receiver Control Panel are shown in Figure 6-12 Audio controls
on page 113.
Figure 6-12 Audio controls
The Speaker Button on the Receiver Control Panel enables and disables remote audio playback. When
remote audio playback is enabled, the Sender records and transmits audio to the Receiver for
playback. Audio controls in the Receiver Control Panel allow you set the audio volume, quality, and
stereo/mono format. Note that audio quality and stereo settings will affect your overall network usage
—higher quality audio and stereo usage will increase the network traffic.
The Microphone Button on the Receiver Control Panel enables and disables remote microphone. When
remote microphone is enabled, microphone input from the Local Computer is sent to the Remote
Computer for capture by the Remote Computer application.
NOTE: The audio controls in the Receiver Control Panel can be set by using Receiver audio
properties. See
Receiver audio properties on page 166.
ENWW
Remote audio operation
113