HP RIP Software - HP RIP Software User Guide

Creating a Color Profile 4-19
including at the ends of the ramps. Adjust the ink channel limits
as necessary.
• Click the Apply button to save these ink limits.
The example below shows how the dot gain curve looks after you
click the curve as shown in Fig. 4-9 and click the Apply button.
15. Click the “Global ink limit - Print chart” button to print the global ink
chart. (If you already know the value you will enter, you can check
the “Skip print” box to skip printing the chart.)
16. Examine the higher ink coverage end of the global ink limit chart for
excessively heavy ink coverage and/or lack of curing (UV inks).
Enter a value below this point for the global ink limit.
Tip Most global ink limits should be between 280 and 340 for
reflective media.
17. (Optional) Click the “Verify - Print chart” button to print the verifica-
tion ramps, which consist of C, M, Y, K, R, G, B, CMY, and CMYK
gradations (from 0 to 100 percent) using the newly-created dot gain
curves.