HP RIP Software - HP RIP Software User Guide

How to Add a Printer to Windows XP 5-9
10. Enter the IP address of the TCP/IP port you created on the RIP.
11. Replace the default port name with the name of the port you
assigned when you created it on the RIP.
12. Click Next.
The Additional Port Information Required dialog box appears.
13. Click the Custom radio button, then click the Settings button.
14. Verify and change, if needed, the port name and IP address.
15. In the Protocol section, click the LPR radio button.
16. In the LPR settings section, enter the name you gave the TCP/IP
port.
17. Click OK, then click Next.
This displays a summary of the port installation information.
18. Click the Finish button.
This displays the Add Printers Wizard.
19. Click the Have Disk... button.