HP RIP Software - HP RIP Software User Guide

1-22 Installation
29. Click the Continue Anyway button.
Next, Windows copies the necessary files, and sends a test page
to the printer. Then it displays a dialog box that asks whether the
test page printed correctly.
30. Click the OK or Troubleshoot button.
If the test page prints, the Add Printer process is complete.
If the test page does not print and you click the Troubleshoot but-
ton, Windows guides you through a troubleshooting process the fix
the error.
Macintosh OS
In order to print, you add a printer to the printer list and assign it to a
PPD. The steps vary slightly between versions of OS X, but the selec-
tions are the same (the procedure for OS X 10.4 appears below). For
further information, refer to the user documentation for your operating
system version, or see Tech Notes 2543, 2559, or 2561.
1. Make sure the printer is connected to your network or computer,
plugged in, and turned on.
2. Open the Printer Setup Utility, in the Utilities folder in the Applica-
tions folder.
3. Choose Show Printer List from the View menu.
The Printer List window appears.
4. Click the Add Printer button.
5. From the first pop-up menu,
select LPR Printers using IP.
6. Enter the IP address of the RIP next to Address. The IP address
can be found on the Server Status screen (see “Viewing Server
Status” on page 3-2).
7. Leave the Queue field blank, or enter a queue (TCP/IP input port)
name as defined on the RIP.
8. Unless automatically selected, click the drop-down list next to Print
Using, and select the printer model (PPD).
9. Click Add. This adds the printer to the list of printers.