HP RIP Software - HP RIP Software User Guide

2-6 Working with Queues
Viewing and Changing
Job Properties
1. In the tree pane, click the queue containing the job you want to
change.
This displays the queue’s list of print jobs in the detail pane.
2. Click the job listing in the detail pane.
This displays the Job Properties page. This page has the following
sections, which you can access by clicking the tabs at the top of the
page:
• General — view ink and media usage, status.
• Route — view and change the job route (port, input queue, pro-
cess, output queue, printer, RIP Saver queue).
• RIP — view and change RIP options.
• Profile — view and change the color profile.
• Printing — view and change printing options.
• Crop/Size — manipulate the image before it is RIPed. This tab
appears when “Default Print Mode for Downloaded Images” on
the RIP tab is set to “Manual.” Changing the cropping for a job
in a Output or RIP Saver queue will send the job back to an
Input queue for RIPing again. Jobs can be resized after RIPing.
• Color (Output Queues only) — make post-RIP adjustments to
image attributes in the RIP Saver file.
As applicable, various action buttons are located at the bottom of
these tabs:
• To save your changes, click the Submit ( ) button.
• To cancel your changes, click the Cancel ( ) button.
• To send input queue jobs directly to the RIP, or output queue
jobs directly to the printer, click the RIP Now or Print Now
( ) button.
• To pause the job, click the Pause ( ) button.
• To create a new filter based on this job (from Output queues
only), click the Add Filter ( ) button. See “Using Filters” on
page 4-10 for more information about filters.
Note If more than one user is making changes (via the remote
console feature), the last change made takes precedence.