HP RIP Software - HP RIP Software User Guide

Configuring the Printer 3-17
Note You can calibrate with the camera on a given media if any
of your installed profiles for that media contain camera
data. All factory profiles include camera data. For profiles
you created, if you checked the box marked “Allow cam-
era calibration,” then the profile contains camera data
(see “Device Configuration” on page 4-16).
If you use a profile without camera data, calibrate the
printer with an external device for best results.
Factory backlit profiles do not include camera data.
Note If you cancel the calibration at the printer control panel,
you must also click the Cancel key on the RIP to cancel
the calibration.