HP Reference Information Storage System v1.6 Administrator Guide (T3559-96073, July 2007)

• Delete LDAP Filter: Criteria to include or exclude speci fic users in the LDAP deleted users
directory. Add to the default for special cases.
For Domino, ignore this field because it is not enabled.
2. Click Next Step to create the job.
3. T o assign this job to an HTTP portal, c lick Assign Job.
See "Assigning HTTP portals" on page 47 for further instructions.
Assigning HT T
Pportals
Before runnin
gaDASjob,assignanHTTPportalonwhichtorunthejob. Onlyonejobcanbe
assigned to an HTTP portal.
If all HTTP portals are being used, reassign the HTTP portal from another job. (To reassign an HT TP
portal, select a n existing DAS job and click the Unassign HTTP button.)
To assign an H
TTP portal to a job:
1. Click Assign Job.
Figure 9 Assign a job to a portal
2. Complete the form by entering the following information:
• DAS server IP: IP of the DAS H TTP portal where DAS runs the configuration.
•Configuration Enabled: Select Yes to enable. If not enabled, the job cannot be scheduled or
started with this console.
•Configuration running state: Do not change.
• Period: Number of minutes b etween job runs. Enter 0 to run the job once.
• DAS ser ver running state: Do not change.
3. Click Save.
NOTE:
Domino users only: WhenassigninganHTTPportaltoDomino,copythefile
/opt/DAS/runtime/LoadChangesDomino.dse to /opt/DAS/runtime/LoadChanges.dse
before running the job.
Starting, scheduling, and stopping DAS jobs
1. IntheDASAvailableJobsview,selectthejob.
2. To start the job without making changes to the schedule, click Start.
3. To make a change to the schedule before star ting the job:
a. Click Schedule.
b. Enter the number of minutes between job runs. To run a job once, enter 0.TheDASschedule
should not be set to anything less than 60 minutes.
Version 1.6
47