HP Reference Information Storage System v1.6 Administrator Guide (T3559-96073, July 2007)

3. Check the Status Area to see results of the cloning operation.
A check icon indicates the cloning operation is proceeding normally.
An X icon appears if the cloning operation has failed.
Reprocessing
The Reprocessing view displays each domain and shows whether re processing is enabled, when
reprocessing
is scheduled, and a h istory log report. Reprocessing is an engine service that scans recently
stored data and reallocates messages to the proper repository.
Most reprocessing occurs as an automated and transparent backg round process that does not require
any operational effort other than passive monitoring.
In most cases,
messages are reprocessed to reapply routing rules that have been recently added and
are applied t
oashorttimeperiodbeforethechangehasoccurred. TheReprocessingviewallowsyou
to schedule and enable reprocessing based on new routing rules.
NOTE:
When you make a change using the Reprocessing Utility, the change does not take place immediately. It
is put in the job queue, a nd the reprocessing itself occurs 24 hours later.
Table 39 Link t o Repro cessing view
Origin
Link
left menu
Data Management > Reprocessing
Rescheduling all reprocessing schedules
To reschedule all the domains to the same reprocessing schedule:
1. In the Repr ocessing v iew, click Reschedule All.
2. Complete the form to set the status and schedule.
3. Click Reschedule All.
4. To ensure that all schedules are enabled, verify that all Reprocessing Status check boxes are selected.
If selected, the text Enabled appears next to the check box.
Editing reprocessing schedules
To edit a domain’s reprocessing schedule:
1. In the Reprocessing vie w, click the edit link next to the domain you want to edit.
Figure 13 Editing reprocessing schedules
2. Complete the form to set the status and schedule.
3. Click Save Schedule.
66
Data management