HP Reference Information Storage System v1.6 Administrator Guide (T3559-96073, July 2007)

4. To ensure the schedule is enabled, verify that the corresponding Reprocessing Status check box
is selected.
If selected, the text Enabled appears next to the check box.
Changing the reprocessing status
You ca n enable or disable a reprocessing schedule of a specific domain or all the dom ains listed.
To change a reprocessing schedule:
1. In the Reproce
ssing view, locate the domain whose schedule you want to enable or disable.
2. Complete any o
f the following tasks to change the status:
Figure 14 Change the reprocessing st atus
• To enable reprocessing for a specific domain, select the corresponding Reprocessing Status
check box.
•Todisablereprocessingforaspecific domain, clear the corresponding Reprocessing Status
check box.
• To enable rep rocessing for all domains, click Resume All.
• To disable reprocessing for all domains, click Suspend All.
3. Verify the status by noting the text Disabled or Enabled next to the Reprocessing Status check box.
Using the Reprocessing Utility
You c an reprocess a user repository if you think a user hasn’t been included in the processing.
In the Reprocessing Utility area of the view:
Figure 15 Reprocessing utility
1. Enter the following information in the text boxes:
• The user email address
• The user repository ID
Users can only be reprocessed if their email address and repository are in the RISS system. If so,
they are listed in the Account M anager.
2. In the Domain Name drop-down list, select the domain in which the user repository resides.
3. Specify a date range, and click Add in Reprocessi ng Qu e ue.
The job is sent to the queue, and the reprocessing takes place 24 hours later.
Version 1.6 6 7