HP Reference Information Storage System v1.6 Administrator Guide (T3559-96073, July 2007)

Figure 18 E d it domain retention period
3. Click Save Retention Now!.
4. To ensure that retention is enabled, verify that the domain’s Retention Status check box is selected.
If selected, the text Enabled appears next to the check box.
Changing th
e retention processing status
You can ena
ble or disable retention processing for a specific domain or all the RISS domains.
To change the retention proc essing status:
1. Locate the domain whose retention processing you want to enable or disable.
2. Complete any of the following tasks to change the status:
•Toenable
retention processing for a specifi c domain, select the corresponding Retention
Status check box.
• To disable retention processing for a specific domain, clear the corresponding Retention
Status ch
eck box.
• To enable retention processing for all domains, click Resume All.
• To disable retention processing for all domains, click Suspend All.
3. Verify the status by noting the text Disabled or Enabled next to the Retention Status check box.
Viewing retention history logs
The Statistics and Logs area at the bottom of the Retention view shows the last data optimization runs
for each configured domain. The log includes each domain group, when a domain was reprocessed
last, and file activity.
Datab
ase and data backup
DB2 da
tabase files and the master configuration files are backed up automatically every night. This
view s
hows the status of the last two lo cal backups, the last backup to the kickstart server, and the
tape backup if it is enabled.
70
Data management