HP Reference Information Storage System v1.6 Administrator Guide (T3559-96073, July 2007)

Figure 20 Creating a new file
3. Click Add,andselectthePSTfiles.
Only files in the Select Files To Process list are imported. In the file you are creating, the
corresponding XML tags are <FileSpecList> and <FileSpec>.
4. To import PST files larger than 150 MB, edit the following setting in RISS PST Importer.ini
to reduce performance degradation and increase throughput:
[PSTLaunchMgr]
MaxProcesses=1
5. If necessary, select PST files you do not want to process, and click Remove.
6. In the Select Output File box, enter the path and file name of the file you are creating or revising, or
click Browse to navigate to a location.
7. Enter MA PI logon and RISS location information in the following boxes:
• Exchange Server: Exchange ser ver used when accessing the GAL for address resolution.
The XML tag is <Server>.
• Mailbox: Mailbox on Exchange ser ver used when accessing the GAL for address resolution.
The XML tag is <Mailbox>.
• SMTP Host: D NS name or IP address of the RISS SMTP portal used to submit messages to
RISS. The XML tag is <SMTPSer ver>.
• Port: SMTP port number. This setting is op tional and the default is 25. The XML tag is
<SMTPPort>.
• HTTP Host: Domain name or IP address of the RISS HTTP server queried when checking for
duplicate messages. The XML tag is <HTTPServer>.
• Domain: RISS domain used when checking for duplicate messages to be submit ted. RISS
domain is case-sensitive and must match the domain name in Domain.jcml.TheXML
tag is <RISSDomain>.
• Repository: Repository into which documents in the Select Files To Process list are delivered.
The XML tag is <Repository>.
88 PS T Importer