HP IAP Version 2.0 Administrator Guide (July 2008)
Figure 4
Domain C onfiguration
Platform Settings
The lower portion of the Platfo rm Settings view displays the setup details for the IAP. This information is
taken from the BlackBoxConfig.bct file.
Firewall Settings
The Firewall Settings view shows the firewall status and settings for the PCC server and the IAP HTTP
portals, and their virtual IP (VIP) addresses.
It incl
udes the following information:
Table 20 Firewall ports
Feature
Descri
ption
Virtual IP The virtual IP address.
Port
The port number .
Servi
ce
The service running on the port.
Type
The transfer protocol used on the port: TCP or UDP
Inbound/Outbound
Shows if the firewall is
enabled or disabled on the port’s inbound
and outbound traffic. Outbound trafficisnotfiltered on the PCC server
ports.
36
Configuration