HP IAP Version 2.0 Administrator Guide (July 2008)

1. Click Assign Job.
Figure 9 Assign a job to a portal
2. Complete the form by entering the following information:
•DASserverIP
: IP of the DAS HTTP portal where DAS runs the configuration.
•Configuration Enabled: Sele ct Yes to enable. If not enabled, the job cannot be scheduled or
started with this console .
•Configuratio
n running state: Do not change.
• Period: Number of minutes between job runs. Enter 0 to run the job once.
• DAS server running state: Do not change.
3. Click Save.
Starting, scheduling, and stopping DAS jobs
1. IntheDASAvailableJobsview,selectthejob.
2. To start the job without making changes to the schedule, click Star t.
3. To make a change to the schedule before starting the job:
a. Click Schedule.
b. Enter the number of m inutes between job runs. To run a job once, enter 0.TheDASschedule
should not be set to anything less than 60 minutes.
c. Click Confirm Schedule to save your changes.
d. To launch the selected job, click Start.
A notice appears stating that the job started successfully.
4. Click Back to M ain Page to return to the DAS view.
TostopaDASjob:
1. In the DAS Available Jobs view, select the job and click Start/Stop.
A notice appears stating that the job has stopped.
2. Click Back to M ain Page to return to the DAS view.
Editin
g or deleting jobs
To edit
or delete an active or configured job:
1. In the
DAS Available jobs area, click the name of the job you want to edit or delete.
2. To edit the job, click Edit and edit the job mapping.
Click
the Advanced Options icon (
) to edit advanced options. See “Creating jobs” on page 42
for i
nformation about job options.
3. To delete the job, click Delete.
Administrator Guide
45