HP IAP Version 2.0 Administrator Guide (July 2008)
Cloning smart ce
lls (copying data)
To clone a smart cell:
1. Perform one of the following actions:
• Select the sm ar
tcellfromtheSourcefield.
• If the option is present, click Change Source to select a different sm art cell for cloning. When
the selection box appears, select the smart cell you want from the drop-down list, and click
Select.
2. Click Clone C
ell.
This button is unavailable if there are no smart cells to clone.
When cloning is successful a pop-up panel appears on the PCC.
3. Check the Status Area to see results of the cloning operation.
A check icon indicates the cloning operation is proceeding normally.
An X icon app
ears if the cloning operation has failed.
Reprocessing
The Reprocessing view displays each domain and shows whether repro cessing is enabled, when
reprocessing is scheduled, and a histor y lo g report. Reprocessing is a n engine ser vice that scans recently
stored da ta and reallocates messages to the proper repository.
Most reprocessing occurs as an automated and transparent background process that does not require
any operational effort other than passive monitoring.
In most cases, messages are reprocessed to reapply routing rules that have been recently added and
are applied to a short time period before the change has occurred. The Reprocessing view allows you
to schedule and enable reprocessing based on new routing rules.
NOTE:
When you make a change using the Reprocessing Utility, the change does not take place immediately. It
is put in the job queue, and the reprocessing itself occurs 24 hours later.
Table 40 Link to Reprocessing view
Origin
Link
left menu
Data Management > Reprocessing
Rescheduling all reprocessing sch edules
To reschedule all the domains to the same reprocessing schedule:
1. In the Reprocessing view, click Reschedule All.
2. Complete the form to set the status and schedule.
3. Click Reschedule All.
4. To ensure that all schedules are enabled, verify that all Reprocessing Status check boxes are selected.
If selected, the text Enabled appears next to the check box.
Administrator Guide
65