HP IAP Version 2.0 Administrator Guide (July 2008)
2. Select the traps to be activated, and click Set Traps.
Thefollowingtrapscanbeactivated:
• smartcell_dead: A smart cell has failed. This trap is generated when a smartcell in the
IAP goes in the dead state.
• reprocessing_trap: Reprocessing has failed. This trap is generated when the reprocessing
service encounters a problem during execution.
• retention_trap: Retention has failed. This trap is generated when the retention service
encounters a problem during execution.
• quarantine_trap: One or more quarantine repositories has failed. This trap is generated
when the qu arantine service encounters a problem during execution.
• raidstatus_trap: There is a d isk hardware failure. This trap indicates an abnormal condition
on an IAP server’s RAID controller.
• bbwcstatus_trap: This trap indicates an abnormal condition on a RAID controller’s
battery-backed write cache.
• smartcell_suspend: A smart c ell is in the suspended state a nd cannot store data. This trap
indicates that a suspend event has been sent to the SC.
• smartcell_unsuspend: This trap indicates that an unsuspend event has been sent to the SC.
• smartcell_assign: This trap indicates that an assign event has b een sent to the SC.
• smartcell_assign_space: This trap indicates that an assign_space event has b een sent
to the SC.
• smartcell_assign_restore: This trap indicates that an assign_restore (cloning) event has been
sent to the SC.
• smartcell_found: This trap indicates that a previously lost SC has been started. An attempt
will be made to recover it.
• smartcell_lost: This trap ind icates that an SC has been shutdown or stopped. Its pair will
be suspended.
• pingFailure: This trap indicates that a specific host has stopped responding to the ping
service. The ping service down means either the machine is getting rebooted or there is a
network failure. If a reboot has not been issued by the administrator then there is pro blem
with the machine.
• partition_full: This trap ind icates that one par tition has reached a c ertain critical usage.
• fs_full_trap: A filesystem on an IAP has reached 99% full.
• machine_unresponsive: The IAP OS and applications on a machine are down. Cannot
ping the machine.
• Assign_space: A trap that is sent when a smartcell group has run out of room and a new
smartcell group nee d s to be assigned.
Recei
ving SNMP events by email
If you
do not have a monitoring management server, you can receive SNMP notifications via email. This
opti
on is also useful if you are away from the office.
To enable the service, enter your email address or the email address of the person who will receive the
notifications, and click Add.
Repea
t this step if you want to add more recipients.
You can d isable or delete an email recipient by clicking the radio button in front of the p erson’s nam e,
then clicking Disable or Delete.
NOTE
:
The m
ail h ost’s IP add ress must be entere d in the Email Reports view for SNMP email notifications to be
sent. See “Detailed email reports” on p age 79 for more information.
78
Reporting