HP StorageWorks Reference Information Storage System V1.4 Administrator Guide (T3559-96027, March 2006)

Figure 25 Creating a new file
3. Click Add,andselectPSTfiles. Only files in the Select Files To Process list are imported. In the file
you are creating, corresponding XML tags are <FileSpecList> and <FileSpec>.
4. To import PST files larger than 150 MB, edit the following setting in RISS PST Importer.ini
to reduce performance degradation and increase throughput:
[PSTLaunchMgr]
MaxProcesses=1
5. If necessary, select PS T files you do not want to process, and click Remove.
6. In the Select Output File box, enter the path and file name of the file you are creating or revising, or
click Browse to navigate to a location.
7. Enter MAPI lo gon and RISS loc ation information in the following boxes:
• Exchange Ser ver: Exchange ser ver used when accessing the GAL for address resolution.
XML tag is <Ser ver>.
• Mailbox: Mailbox on Exchange server used when accessing the GA L for address resolution.
XML tag is <Mailbox>.
• SMTP Host: DNS name or IP address of the RISS SMTP portal used to submit messages to
RISS. XML tag is <SMTPServer>.
• Port: SMTP port number. This setting is o ptional and the default is 25. XML tag is
<SMTPPort>.
• HTTP H ost: Domain nam e or IP address of the RISS HTTP server queried when checking for
duplicate messages. XML tag is <HTTPServer>.
• Domain: RISS domain used when checking for duplicate messages to be submitted. RISS
domain is case-sensitive and must match the domain name in Domain.jcml.XMLtagis
<RISSDomain>.
• Repository: Repository into which documents in the Select Files To Process list are delivered.
XML tag is <Repository>.
• Audit Repository: Name of repository that receives the PST Impor ter lo g file created during
the import process. XML tag is <AuditRepository> .
8. To indicate mining and tombstone settings, select the following check boxes:
144
PST Importer