HP StorageWorks Reference Information Storage System V1.4 Administrator Guide (T3559-96027, March 2006)

PST Import Monitor automatically collects statistics according to the Refresh Interval specified.
The default is 10 seconds. You can change the automatic refresh interval to any whole
number between 1 and 60 seconds.
• To reset a failed p rocess, select Failed under Active Processes to display a list of all failed
processes, right-click the failed process, and click Reset, as shown in the following figure.
Figure 27 Resetting process
Depending on the reasons the process failed, resetting a failed process may not correct the problem.
However, PST Importer tries to reprocess it as directed.
Displaying repor t s and log files
This section provides information about these reports:
•
PST Impo rt report,page148
•
Status M
onitor report, page 148
•
PST Importer log file,page149
PST Import report
Use PST Import Monitor to generate a PST Import report in HTML format. You can then import the report
into a spreadsheet for analysis or progress tracking if needed.
1. Under Active Processes, select a process option, and click Report. A dialog box appears.
2. Specify where to save the report, and enter a file name. The default directory is
<install_path>\Reports.
3. Click Save.
Statu
sMonitorreport
At ea ch refresh interval, status information is automatically saved to <install_path>/LogFiles/
PSTImporterStats.log. This is useful if the installation has its own separate process that monitors
import progress. Modif y the following RISS PST Importer.ini settings to specify a different path
and file name for the report:
[PST
Importer]
MonitorPath=UNCPath
When the MonitorPath is specified, PST Importer creates the file specified by UNCPath. This file contains
stat
istics displayed i n PST Import Monitor. An external process ca n monitor and parse this file to
determine the import status.
148
PST Importer