HP StorageWorks Reference Information Storage System V1.4 Administrator Guide (T3559-96027, March 2006)

• Click User Manag ement intheleftmenu.
Creating and running DAS jobs
The basic flow for creating and running a DAS job from the User Management view:
1. Create an LDAP c
onnection by clicking New LDAP. See Creating LDAP server connections.
2. Create the job by clicking New JOB. When you create a new job, you assign the job a name and
an LDAP connection, and set up the job query into the LDAP server. See Creating jobs.
3. Assign the job
to an HT TP portal. See Assigning HTTP portals.
4. Run the job by clicking the corresponding Controls button. See Running DAS jobs.
Creating LDAP server connections
To create an LDAP connection:
1. In the User Management view, click New LDAP.
Figure 3 Create an LDAP conne ction
2. Complete the form to create an LDAP service connection by entering the following:
• Connection Name : Name used to identify the LDAP connection.
• Hostname: IP address of the LDAP server.
• Binder user: User in the LDAP directory tree that you want to bind to. At
a minimum, user must h ave read access to all users objects. For example:
cn=Administrator,cn=Users,dc=hostname,dc=com.
• Binder pswd: Password of the Binder user.
• Directory Server t ype: Type of LDAP server to which you are conne cting: Microsoft Active
Directory or Lotus Domino.
• Security Option: Type of LDAP security: simple authentication or SSL.
• Port: Open LDAP port of the LDAP server. Use the por t 389 for simple authentication. Use
port 636 for SSL support.
3. To test the LDAP server connection before creating it, click LDAP test. A content pane displays the
status of the LDAP connection such as whether the connection and bind were successful and what
authentication types are supported by the LDAP server. Errors are displayed in red.
Reference Information Storage System
39