HP StorageWorks Reference Information Storage System V1.4 Administrator Guide (T3559-96027, March 2006)

1. In the User Managem ent view, click Controls for the job you want to run. The DAS Contr ol Panel
displays the status on p revious jobs (see "Viewing DAS history logs" on page 45 for more
information).
Figure 9 DAS Control Panel
2. Complete the form by entering the following:
• DAS server IP: IP of the DAS HTTP portal where DAS runs this con figuration.
•Configuration Enabled: Sele ct Activated to enable it. If not enabled, job cannot be
scheduled or started with this console.
• DAS Server State: Do not change.
• Job Fre quency: Number of minutes between job runs. Enter 0 to run the job once.
3. Depending on the view from which you started, click Save or Assign Job.
Scheduling, starting, or stopping active jobs
To schedule, start, or stop an active job:
1. In the
User Management view, click Controls for the active job you want to manage.
2. To set
how often to run a job:
a. Click Schedule.
b. Enter the number of minutes bet ween job runs. To run a job o n ce, enter 0.
c. Clic
k Schedule to save your changes.
d. To start the job , click Start.
3. To start a job without making changes to the schedule or to start a stopped job, click Start.
4. To s
topajob,clickStart or Stop.
Editing or deleting jobs
To edit or delete an active or configu red job:
1. In the User Management view, click the name of the job you want to edit or delete.
44
Platform Control Center (PCC)