HP StorageWorks Reference Information Storage System V1.4 Administrator Guide (T3559-96027, March 2006)

The time before reprocessing schedule changes take effect depends on how your system is configured.
By default, the system checks for reprocessing schedule changes every two hours. Contact your HP
Support representative if you need this changed.
The Repro cessing view displays each domain, whether reprocessing is enabled, and when reprocessing
is scheduled, and a history log report.
NOTE:
Click the domain name to access the RISS Information view and display more information about the
domain configuration. For more information, see RISS Information view.
Displaying the Reprocessing view
To display the Reprocessing view:
• Click Data M ana g em ent > Reprocessing in the left menu.
Rescheduling all reprocessing schedules
To reschedule all the domains to the same reprocessing schedule:
1. In the Reprocessing view, click Reschedul e All.
2. Complete the form to set the status and schedule.
3. Click Reschedule All.
4. To ensure that all schedules are enabled, verify that all Reprocessing Status check boxes are selected.
If sele cted, the text Enabled appears next to the check box.
Editing reprocessing schedules
To edit a domain’s reprocessing schedule:
1. In the Reprocessing view, click the edit link next to the domain you want to edit.
2. Complete the form to set the status and schedule.
3. Click Save Sc hedule.
4. To ensure the schedule is enabled, verify that the corresponding Reprocessing Status check box is
selected. If selected, the text Enabled appears next to the check box.
Changing the reprocessing status
You can enable or disable a reprocessing schedule of a specific domain or all the domains listed.
T o change a reprocessing schedule:
1. In the Reprocessing view, locate the domain whose schedule you want to enable or disable.
2. Complete any of the following tasks to change the status:
• To enable reprocessing for a specific domain, select the corresponding Reprocessing Status
check box.
•Todisablereprocessingforaspecific domain, clear the corresponding Reprocessing Status
check box.
• To enable reprocessing for all d omains, click Resume All.
• To disable reprocessing for all domains, click Suspend All.
3. Verify the status by noting the text Disabled or Enabled next to the Reprocessing Status check box.
50
Platform Control Center (PCC)