HP StorageWorks Reference Information Storage System V1.4 Administrator Guide (T3559-96027, March 2006)

ManualsBrandsHP ManualsSoftwareHP RISS Domino Archiving Gateway

100

NOTE:

For monitoring purposes, you normally do not need to use this view. It is intended only for troubleshooting

and conﬁguration by installers and advanced system administrators.

Table 106 Links to All Warnings views

Origin

Link

left navigation menu

All Warnings

left navigation menu

HTTP Warnings

left navigation menu

Smtp Warnings

left navigation menu

Metaserver Warnings

left navigation menu

Smartcell Warnings

left navigation menu Labﬁrewall Warnings

Table 107 Links from All Warnings views

Destination

Link

"System Status" on page 32 Return to Summar y

Hostgroup Information

This view provides information about service monitoring performance for a given host group. Except

for the addition of access to Hostgroup Commands, this view provides the same information as the

Nagios Stats view, ﬁltered for a single host group.

Table 108 Hostgroup Information view features

Feature

Description

Time Frame/Checks

Completed

Number and percentage of PCC services checked in indicated time frames (since

PCCstartuporinthelast1,5,15,or60minutes).

Check Metric/Min/

Max/Average

• Execution Time

• Latency

Minimum, maximum, and average times:

• it took to check service

• between time ser vice check was scheduled and time it was executed

PCC does not use % State Change.

Hostgroup Commands

Linkstocommandsthatperformactionsonthishostgroup. See"Hostgroup

Commands section" on page 99 for more information.

Note: Commands that disable (notiﬁcations, status checks, and so on) override

commands tha t enable. For example, if you disable service checks for a p articular

host group using the Hostgroup Information view (Disable checks of all

services in this hostgroup command), but enable checks for all services

using the Nagios Info view (Start executing service checks command).

Services for the host group are not checked because disabling overrides enabling.

The Passive Service Checks charts are not used; all PCC service checks are active.

Related Views

•

See "Nagios Info" on page 66 for information about global commands affecting all host groups.

• The Nagios Stats view presents the same monitoring performance information, but for all host

groups; and it does not have Hostgroup Commands. See "Scheduling Queue" on page 69.

Platform Control Center (PCC)