HP Reference Information Storage System Version 1.6 Administration Guide revision 2 (T3559-90809, September 2007)

4. To ensure the schedule is enabled, verify that the corresponding Reprocessing Status check box
is selected.
If selected, the text Enabled appears next to the check box.
Changing the re processing status
You can enable or disable a reprocessing schedule of a specific domain or all the domains listed.
To change a reprocessing schedule:
1. In the Reproce
ssing view, locate the domain whose schedule you want to enable or disable.
2. Complete any o
f the following tasks to change the status:
Figure 14 Change the reprocessing s tatus
• To enable reprocessing for a specific domain, sele ct the corresponding Reprocessing Status
check box.
•Todisablereprocessingforaspecific domain, clear the corresponding Reprocessing Status
check box.
• To enable reprocessing for all domains, click Resume All.
• To disable reprocessing for all domains, click Suspend All.
3. Verify the status by noting the text Disabled or Enabled next to the Repro cessing Status check box.
Using the Reprocessing Utilit y
You can reprocess a user repositor y if you think a user hasn’t been included in the processing.
In the Reprocessing Utilit y area of the view:
Figure 15 Re processing utility
1. Enter the following information in the text boxes:
• The user email address
• The user repositor y ID
Users can only be reprocessed if their email a ddress and repository are in the RISS system. If so,
they are listed in the Account Manager.
2. In the Domain Name drop-down list, select the domain in which the user repository resides.
3. Specify a date range, and click Add in Reprocessing Queue.
The job is sent to the queue, and the reprocessing takes place 24 hours later.
Administrator Guide
67