HP StorageWorks SAN Virtualization Services Platform administrator guide (5697-0109, July 2009)

2 Adding devices to the domain
This chapter describes how to expand your SVSP domain by the addition of licensed capacity, arrays,
DPMs, and servers. Adding servers requires that you consider the appropriate multipathing for the
operating system and switch zoning. Only presentation for an HP Enterprise Virtual Array (EVA) and
Modular Storage Array (MSA) is discussed. Please consult the vendor documentation for other types
of arrays.
SVSP licenses
When adding devices to an SVSP domain, you may need to install additional license keys to increase
your capacity or add an additional license type. The Domain WWN is the same as the node name
of your first pair of Data Path Modules in a DPM group. A second DPM group will have its own WWN
that is different from that of the domain. License keys are obtained from the HP website at http://
webware.hp.com.
NOTE:
Once the domain is configured with a WWN, the WWN cannot be changed.
VSM supports five types of permanent, InstantOn, and evaluation licenses. The type of license
determines which operations you can perform. A license is valid for performing the allowed operations
on a certain amount of capacity. The basic unit of software license capacity is 1 TB. The 4–port LTU
enables ports on the DPMs within the same DPM group. Most operations use license capacity. For
example, configuring a back—end LU as a member of a storage pool deducts the BELU's disk capacity
from your volume management licensed capacity. The following types are available:
Table 2 VSM license types
DescriptionLicense type
Enables you make copies within the domain (except for synchronous mirrors, which
are included in the Volume Manager license). You can perform the following
operations within one domain in addition to the basic license:
• Create PiTs and snapshots of virtual disks within the local domain.
• Use snapclones to copy virtual disks and snapshots within the local domain.
Business Copy (BC)
Enables you to make copies between domains. You can perform the following
operations in addition to the basic license:
• Supports remote snapclones between two domains.
• Supports remote async mirrors between a single source domain and up to three
remote domains.
NOTE:
The manipulation of PiTs used by asynchronous mirrors requires a Business
Copy license.
Continuous Access (CA)
HP StorageWorks SAN Virtualization Services Platform administrator guide 21