HP StorageWorks SAN Virtualization Services Platform administrator guide (5697-0109, July 2009)

5. Bind the WWPN to a Target ID.
6. Click Save, and enter the password on the security check popup. If this is the first time you have
used the SanSurfer application, and you have not changed the default password, the password
is config.
7. Restart the server to make the changes effective.
The HBA saves this information. It makes no difference in what order the arrays are scanned. The
HBA assigns the saved target ID to the WWPN.
Emulex HBAs with Windows
To enable persistent binding with Emulex HBAs:
1. Launch the HBAnyware utility. This application can be downloaded from hp.com or emulex.com.
2. Select a port on an HBA from the list displayed on the left side of the screen.
3. Select the Target Mapping tab.
4. Bind to the WWPN by clicking on a Target WWPN, and then clicking the Add Binding button.
Either accept the default entries or change them as appropriate and click OK.
Adding devices to the domain32