HP StorageWorks SAN Virtualization Services Platform Manager user guide (5697-0295, January 2010)

DescriptionDisplay field
The user who last modified the virtual disk.Modified By
Stripe set information—Security tab
The Security tab displays the access permissions of users and user groups for the selected stripe set.
For information about configuring permissions, see
“Configuring security permissions for entities” on page 349.
Table 31 Stripe set Security tab fields
DescriptionDisplay field
The row number.No
An icon indicating either a user or user group. Possible values:
•
—A user.
•
—A user group.
Type
The name of the user or user group.Name
The type of access permitted to the user or user group. Possible values:
• Full—The user or user group has permission to delete and modify the stripe
set.
• Modify—The user or user group has permission to modify the stripe set but not
delete the stripe set.
• Read—The user or user group has permission to view stripe set information
but not to modify or delete the stripe set.
• None—The user or user group does not have permission to access the stripe
set.
Permission
Stripe set information—Disabled Operations tab
The Disabled Operations tab shows which operations you cannot currently perform on the selected
stripe set, and the reason for each. See the release notes for a current list of disabled operations.
Table 32 Stripe set Disabled Operations tab fields
DescriptionDisplay field
The name of an operation that is disabled.Operation name
The reason why the operation is disabled.Reason
Creating stripe sets
You can create a new stripe set from back-end LUs with the status present. This status means that the
back-end LU is present on the SAN and accessible to VSM and the back-end LU has not been configured
as a member of a stripe set or storage pool.
The number of back-end LUs per stripe set is limited to 4. A stripe set must be added to a storage
pool before you can allocate the stripe set’s capacity to hosts. The total capacity of the stripe set is
Working with stripe sets70