HP StorageWorks SAN Virtualization Services Platform Manager user guide (AG781-96017, March 2009)

26. Click Next. The Select preferred path screen appears.
Figure 25 Create Virtual Disk wizard—Select preferred path screen
27. Use the checkboxes to set one DPM in the DPM group as primary and one DPM as secondary.
NOTE:
• Use care in selecting the primary and secondary DPMs to prevent over subscribing one
and under utilizing the other.
• If you click Finish without defining the primary and secondary DPMs, VSM defines these
roles automatically.
28. Click Next. The Select folder screen appears.
29. If you want to add the virtual disk to a folder, enter the folder name in the Folder field or click
Browse to browse to the folder. The folder must already be created. For information about creating
folders, see “Creating folders” on page 305.
30. Click Next. A confirmation screen appears.
31. Click Finish. The new virtual disk is created and is displayed in the virtual disks list.
Renaming virtual disks
You can rename a virtual disk if no hosts are currently assigned permission to access the virtual disk.
To rename a virtual disk:
1. In the navigation tree, expand the Entities node.
2. Click the Virtual Disk node. The virtual disks list appears in the list area.
3. Right-click the virtual disk you want to rename.
4. Select Manage > Rename. The Rename wizard opens to the New name screen.
5. In the New name field, enter the new name.
6. Click Next. A confirmation screen appears.
7. Click Finish. The virtual disk is renamed.
Working with virtual disks114