HP StorageWorks SAN Virtualization Services Platform Manager User Guide (5697-0454, May 2010)

VDG snapshot information—Members tab
The Members tab displays the snapshots that are members of the VDG snapshot.
Table 99 VDG Snapshot Members tab fields
DescriptionProperty
The row number.No
The name of the snapshot.Name
The status of the snapshot. Possible values:
• Normal—The status of all the virtual disks from which the snapshot is constructed
is normal. This includes an original virtual disk, the temporary virtual disk cre-
ated for at least one PiT, and the temporary virtual disk created to hold modi-
fications to the snapshot itself.
• Partial—The status of one of the virtual disks from which the snapshot is con-
structed is partial.
Status
The capacity of the snapshot, which is the same as the capacity of the virtual disk
on which the snapshot’s source PiT was created.
Capacity
Shows which hosts have permission to access this snapshot. If a single host has
access permission for the snapshot, the name of that host is displayed. If multiple
hosts have access permission, the value “multiple” appears.
Owned by Host
Yes indicates that this virtual disk is a thin provisioned virtual disk type.Is Thin Provision
VDG snapshot information—Source PiT tab
The Source PiT tab displays the PiT from which the selected snapshot was created.
Table 100 VDG snapshot Source PiT tab fields
DescriptionProperty
The row number.No
The name of the PiT from which the snapshot was created.Name
The status of the PiT.
• Normal—The status of all the virtual disks from which the PiT is constructed is
normal. This includes an original virtual disk, the temporary virtual disk created
for the PiT, and any PiTs and snapshots between the original virtual disk and
the PiT in the hierarchy.
• Partial—The status of one of the virtual disks from which the PiT is constructed
is partial.
Status
Using snapshots220