HP StorageWorks SAN Virtualization Services Platform Manager User Guide (5697-0454, May 2010)

3. Right-click the snapshot or VDG snapshot to which you want to add host permission.
4. Select Manage > Manage Permission > Add Host Permission. The Add Host Permission wizard
opens to the Select type of Host screen.
5. From the “Set permission to host with” dropdown list, select one of the following:
• UDH—Select this value to assign permission to UDHs. The wizard enables you to select spe-
cific hosts and set related parameters in later screens.
• VSM Server—Select this value to assign permission to a VSM server. The wizard enables you
to select a host in the next screen.
6. Click Next. The Select Host(s) screen appears, displaying the list of available hosts.
Figure 45 Add Host Permission wizard—Select Host(s) screen
.
7. If you would like to select a host from a folder, navigate to the folder in the tree on the left of the
screen. The Select Host(s) screen displays the list of hosts that have been copied to the selected
folder.
8. Select a host to which you want to assign permission to access the snapshot or VDG snapshot
and click Add. The host you selected appears in the lower right area of the screen. If you want
to deselect the host, select the host in the lower right area and click Remove.
9. If required, modify the host’s permission by clicking the Permission field for the host and selecting
one of the following from the dropdown list:
• Full—Read/write permission
• Read—Read-only permission
• None—No permission
10. If required, repeat steps 7 through 9 to assign permission to additional hosts.
NOTE:
You can only assign permission to multiple UDH hosts. You cannot assign permission to
more than one VSM server.
SAN Virtualization Services Platform Manager User Guide 227