HP StorageWorks SAN Virtualization Services Platform Manager User Guide (5697-0454, May 2010)

4. In the top area of the screen, select the user that you want to add to the group.
5. Click Add. The user you selected appears in the lower area of the screen. If you want to deselect
the user, select the user in the lower area and click Remove.
6. Repeat steps 4 and 5 if necessary until all the users you want to add to the user group are listed
in the lower area of the screen.
7. Click Next. A confirmation screen appears.
8. Click Finish. The users are added to the user group. Optionally click Refresh to refresh the display.
9. Click Close.
Removing users from user groups
To remove users from a user group:
1. Right-click a user group and select Manage. The User Group dialog box appears.
2. Select a user from the list.
3. Click Remove user from group. The user is removed from the list.
4. Click Close. The user is removed from the user group.
Deleting user groups
To delete a user group:
1. Right-click a user group.
2. Select Delete. A confirmation screen appears.
3. Click Finish. The user group is deleted.
Configuring security permissions for entities
Security permissions can be set differently for every entity and for every user. To configure security
permissions for an entity, you add users and user groups to the entity and specify a permission type
for each user and user group. A user or user group can be assigned any of the following types of
permission for an entity.
Table 144 Security permission types
DescriptionPermission type
Permission to delete, modify, and view an entity.Full
Permission to modify and view an entity, but not to delete the entity.Read/write
Permission to view an entity, but not to modify or delete the entity.Read
No permission to access an entity.None
You can:
• Add users or user groups to entities
• Remove users or user groups from entities
• Specify security permissions for entities
SAN Virtualization Services Platform Manager User Guide 351