HP StorageWorks SAN Virtualization Services Platform Manager User Guide (5697-0454, May 2010)

DescriptionProperty
An ID that the HBA on the VSM server assigns to each storage system controller
port. Windows reports the target ID on back-end LU properties. The target ID, to-
gether with the path ID, identifies the back-end LU.
Target ID
The SCSI port number assigned to the HBA on the VSM server by Windows. Each
HBA has a different port number.
Port Number
The logical unit number with which the back-end LU is presented by the controller.LUN
If the back-end LU is presented by more than one controller, this column indicates
which access paths connect with the back-end LU through the storage system’s
preferred controller for the back-end LU.
Primary
Indicates if the access path is available. If the back-end LU is presented by more
than one controller, the access paths through the primary controller are active
except in case of failover, when the access paths through the primary controller
become inactive and the secondary access paths become active.
Active
A 4-bit bitmask of the following flags:
• 0x01 = set for a primary access path, reset for secondary
• 0x02 = set for an active access path, reset for a passive access path
• 0x04 = set for active/passive LUN (dual controller)
• 0x08 = set for a failed access path
Status Flags
The VSM node to which the access path connects.Attached Node
Back-end LU information—Security tab
The Security tab displays the access permissions of users and user groups for the selected back-end
LU. For information about configuring permissions, see “Configuring security permissions for
entities” on page 351.
Table 24 Back-end LU Security tab fields
DescriptionDisplay field
The row number.No
An icon indicating either a user or user group. Possible values:
•
—A user.
•
—A user group.
Type
The name of the user or user group.Name
Working with back-end LUs56