HP StorageWorks SAN Virtualization Services Platform administrator guide (5697-8056, March 2009)

4. If you want to make changes to your installation, click Back until you arrive at the window where
you can make the change. If you are satisfied with your installation choices, click Next to start
the installation.
After the SVSP VSS hardware provider is installed, the Installation Complete window appears.
5. Click Close to exit the installation wizard.
6. Make sure that the SVSP VSS hardware provider is recognized by VSS by opening a DOS
command prompt window (click Start > Run, and type cmd), typing vssadmin list
providers, and pressing Enter.
The information returned by the vssadmin list provider command is similar to the
information shown in Figure 6.
Figure 6 SVSP VSS hardware provider in a DOS window
Make sure that the SVSP VSS hardware provider appears in the list.
Adding devices to the domain36