HP StorageWorks SAN Virtualization Services Platform SMI-S User Guide (5697-0209, April 2010)

HPSVSP_SnapshotPit : SNIA_SynchronizationAspect
Class introduction
Instances of this class represent a point-in-time of a virtual disk, virtual disk snapshot, or virtual disk
group.
To enumerate PITs, the provider performs the following steps:
1. Enumerate the elements in PitDetailsSeq - shall be considered 1 instance of this class.
Class keys/properties
CommentsDescriptionProperty Name
Unique identifier for this instance in the
scoping namespace.
InstanceID
User friendly name for this object. Not re-
quired to be unique in the scoping
namespace.
Pit NameElementName
Description of the copy type. Available
values:
• 6 ( Mirror )
• 7 ( Snapshot )
• 8 ( Clone )
• 0x8000 ( Move )
7 - SnapshotSyncType
Available values:
• 2 ( Sequentially Consistent )
• .. ( DMTF Reserved )
• 0x8000.. ( Vendor Specific )
2 - Sequentially ConsistentConsistencyType
• 2 ( Not Applicable )
• 3 ( Operation In Progress )
• 4 ( Operation Complete )
3 - Operation In Progress
4 - Operation Complete
CopyStatus
Specifies when point-in-time was created.CreatedTimeWhenPointInTime
Identifies the source instance. Note this is
ObjectPath, not a full Instance.
(API) or ObjectPath.ToString() should
present the Specified format:
• Namespace- Path:Class-
Name.Key1="Value1",Key2="Value2"
• HPSVSP_VirtualDisk : CIM_StorageVir-
tualDisk
• HPSVSP_Snapshot : CIM_StorageVirtu-
alDisk
• HPSVSP_VirtualDiskGroup :
SNIA_ReplicationGroup
SourceElement
SAN Virtualization Services Platform SMI-S User Guide 175