HP StorageWorks SAN Virtualization Services Platform SMI-S User Guide (5697-0209, April 2010)

CommentsDescriptionProperty Name
Describes the type of synchronization that is
characterized by this instance of StorageRep-
licationCapabilities. Supported values are:
• 2 ("Async")—Asynchronous copies may be
created and maintained.
• 3 ("Sync")—Synchronous copies may be
created and maintained.
• 4 ("UnSyncAssoc")—Unsynchronized cop-
ies may be created and maintained.
• 5("UnSyncUnAssoc")—A 'straight copy'
may be created.
{2 ("Async"), 3 ("Sync"), 4 ("UnSyn-
cAssoc"), 5 ("UnSyncUnAssoc"}
SupportedCopyTypes
InitialReplicationState specifies which initial
ReplicationState is supported by a particular
provider.
Set to “Initialized” since this is not an array
and although snapshot would be
“Synchronized”, mirroring, snapclones, and
sync mirrors would be “Initialized,” and so the
lowest common denominator shall be used.
2 ( “Initialized” )InitialReplicationState
Class associations
PropertyToAssociation Name
Capabilities
HPSVSP_StorageConfigurationService :
SNIA_StorageConfigurationService
HPSVSP_ StorageServiceCapabilities :
CIM_ElementCapabilities
HPSVSP_ConfiguredPoolConfigurationCapabilities :
SNIA_StorageConfigurationCapabilities
Class introduction
An instance of HPSVSP_ConfiguredPoolConfigurationCapabilities is enumerated for the Block Services
ConfiguredPool.
This occurrence of the class in this profile documents the copy services specific value.
Class keys/properties
CommentsDescriptionProperty Name
Unique identifier within the scope of the
instantiating Namespace.
HPSVSP_StorageAppliance.Name
+";"+"ConfiguredPoolConfiguration-
Capabilities"
InstanceID
A user-friendly name for the object.
"ConfiguredPoolConfigurationCap-
abilities"
ElementName
SAN Virtualization Services Platform SMI-S User Guide 231