HP StorageWorks SAN Virtualization Services Platform SMI-S User Guide (5697-0209, April 2010)

CommentsDescriptionProperty Name
Default Value for use when creating
a ConfiguredPool from a Primordi-
alPool using CreateOrModifyStor-
agePool()
The number of ImportedExtents
across which data is striped when
creating a StripeSet Composite
Storage Extent from a
PrimoridalPool using
CreateOrModifyElementFromElements()
This shall be set to "1".ExtentStripeLengthDefault
Describes the number of bytes
forming a stripe on a VirtualDisk
when creating a StripeSet from a
PrimordialPool.
Property is set to 1048576, which is
1 megabyte. NULL
UserDataStripeDepthDefault
Class associations
PropertyToAssociation Name
CapabilitiesHPSVSP_PrimordialPool : SNIA_StoragePool
HPSVSP_PrimordialPoolCapabilities :
CIM_ElementCapabilities
Antecedent
HPSVSP_PrimordialPoolSetting : SNIA_Storage-
Setting
HPSVSP_PrimordialPoolSettingsGeneratedFrom-
Capabilities : CIM_StorageSettingsGenerated-
FromCapabilities
Antecedent
HPSVSP_PrimordialPoolSetting : SNIA_Storage-
Setting
HPSVSP_PrimordialPoolSettingsAssociatedTo-
Capabilities : CIM_StorageSettingsAssoci-
atedToCapabilities
Methods
uint32 GetSupportedStripeLengths
Method overview
This method returns the supported stripe lengths for the pool, which translates to the number of disks
allowed in a stripe set. The limits for the VSM are retrieved using the GetLimits() method.
SAN Virtualization Services Platform SMI-S User Guide 61