HP StorageWorks SAN Virtualization Services Platform SMI-S User Guide (5697-0209, April 2010)

IN/OUTCommentsTypeParameter
Name
OUT
The output value is an array populated with an integer count for each
possible stripe length in the array.
NOTE:
The system will use a heuristic to return only stripe lengths of
possible "Right-Sized" stripes. For example: Suppose there are 5
available primordi¬al extents (HPSVSP_ImportedExtent), 3 extents
of 50GB and 2 extents of 100GB. Although there are 5
backend-LU's available, the stripe sizes returned will be [1,2,3],
since the largest stripe length possible (without using dissimlar
sized extents) would consist of the 3 50GB extents.
uint16StripeLengths
uint32 GetSupportedStripeLengthRange
Method parameters
This method returns the possible stripe lengths. All parameters are ignored. This method always returns:
3 "Use GetSupportedStripeLengths instead".
IN/OUTCommentsTypeParameter Name
OUTN/Auint16MinimumStripeLength
OUTN/Auint16MaximumStripeLength
OUTN/Auint16StripeLengthDivisor
GetSupportedStripeDepths
Method Overview
This method returns the 'stripe sizes' allowed.
IN/OUTCommentsTypeParameter Name
OUTuint64StripeDepths
Block Services Package62