HP StorageWorks SAN Virtualization Services Platform SMI-S User Guide (5697-0209, April 2010)

Class keys/properties
CommentsDescriptionProperty Name
Unique identifier within the scope of
the instantiating Namespace.
Default: HPSVSP_StorageAppli-
ance.Name+";"+"Default"
HPSVSP_StorageAppliance.Name+";"+<ID>
Where <ID> is a provider for each in-
stance created.
InstanceID
A user-friendly name for the object.
Default: "Default Setting" Transient:
"Transient Setting " + <ID>
ElementName
Indicates whether or not the element
has a single point of failure
Default/Transient: falseNoSinglePointOfFailure
The minimum number of copies of data
that can be maintained.
Default: 1
Transient: 1
DataRedundancyMin
The maximum number of complete
copies of data to be maintained.
Default: 1
Transient: 1
DataRedundancyMax
The desired number of copies of data
to be maintained.
Default/Transient: 1DataRedundancyGoal
The minimum package redundancy
(how many spindles can fail without
data loss).
Default: 0
Transient: 0
PackageRedundancyMin
The maximum package redundancy
(how many spindles can fail without
data loss).
Default: 0
Transient: 0
PackageRedundancyMax
The maximum package redundancy
(how many spindles can fail without
data loss).
Default/Transient: 0PackageRedundancyGoal
The minimum acceptable value for Ex-
tentStripeLength.
Default: 1
Transient: system minimum disks per
stripe
ExtentStripeLengthMin
The maximum acceptable value for
ExtentStripeLength.
Default: 1
Transient: The number of
HPSVSP_ImportedExtent or system
maximum disks per stripe whichever is
smaller.
ExtentStripeLengthMax
The number of underlying StorageEx-
tents across which data is striped.
Default: 1
Transient: Initially, same as Extent-
StripeLengthMin. ModifyInstance may
be used to set this value.
ExtentStripeLength
The minimum acceptable value for
UserDataStripeDepth.
Default: 1048576 ( 1MB ) Transient:
Minimum of system supported stripe set
sizes
UserDataStripeDepthMin
Block Services Package64