HP StorageWorks SAN Virtualization Services Platform SMI-S User Guide (5697-0209, April 2010)

CommentsDescriptionProperty Name
Indicates whether or not the ele-
ment has a single point of failure.
FalseNoSinglePointOfFailure
The minimum number of copies of
data that can be maintained.
1DataRedundancyMin
The maximum number of complete
copies of data to be maintained.
1DataRedundancyMax
The desired number of copies of
data to be maintained.
1DataRedundancyGoal
The minimum package redundancy
(how many spindles can fail without
data loss).
0PackageRedundancyMin
The maximum package redundancy
(how many spindles can fail without
data loss).
0PackageRedundancyMax
The maximum package redundancy
(how many spindles can fail without
data loss).
0PackageRedundancyGoal
Class associations
PropertyToAssociation Name
Dependent
HPSVSP_ConfiguredPoolStorageCapabilities
: CIM_StorageCapabilities
HPSVSP_ConfiguredPoolSettingsAssociatedTo-
Capabilities : CIM_StorageSettingsAssoci-
atedToCapabilities
HPSVSP_VirtualDisk : SNIA_StorageVolume
Class introduction
This class represents an instance of VSM storage virtual disk. There will be one instance of this class
for each virtual disk on the system excluding TemporaryVirtualDisks.
Virtual disks can be identified using their keys or by using a globally unique WWN. See the Name,
NameFormat, and NameNamespace properties.
Indications
• Name: New VirtualDisk
• Filter: "SELECT * FROM CIM_InstCreation WHERE SourceInstance ISA CIM_StorageVirtualDisk"
• Description: VirtualDisks can be created using the HPSVSP_StorageConfigurationService Cre-
ateOrModifyElementFromStoragePool() method . When the system detects a new VirtualDisk,
generate a CIM_InstCreation indication.
• Name: VirtualDisk Removed
• Filter: "SELECT * FROM CIM_InstDeletion WHERE SourceInstance ISA CIM_StorageVirtualDisk"
SAN Virtualization Services Platform SMI-S User Guide 75