HP StorageWorks SAN Virtualization Services Platform Administrator Guide (5697-0934, May 2011)

Configuring the Datastore
1. Using the VMware VI client GUI, choose the ESX server, select the Configuration tab and then
choose the Storage Adapter link.
2. Under the Storage Adapters window, chose QLA/LP HBA and then select Rescan. Make sure
Scan For New Storage Devices and Scan for New VMFS Volumes are checked in the Rescan
window.
Under the Details window you should see a device for each virtual disk exposed to the ESX
server by SVSP.
3. Using the VMware vCenter client GUI, choose the ESX server, select the Configuration tab
and then click Storage.
126 Deploying VMware ESX Server with SVSP